Military Full Face Gas Mask with Cartridges Dust Mask Respirator Facepiece for Painting Spraying Che
Condition: Brand NewBefore applying the mask must be checked for condition and tightness. Looking around the front part, should ensure that the growth of the helmet-mask as desired. Then determine its integrity, highlighting the glasses assembly. Then check the valve box, the state of the valves. They should not be warped, broken or clogged. On the filtering-absorbing box should not be dents, rust, punctures in the throat - damage. Also draws attention to the fact that the box did not pour grain absorber. Respirator collect so. In the left hand take the helmet-mask of the valve box. Right hand is screwed to the full filtering-absorbing box navintovannoy neck in the outlet valve housing face mask. The new face of the mask before putting wipe inside and outside with a clean cloth slightly moistened with water, and exhalation valves to purge. If you find the mask or other damage eliminate them, if you can not do this mask is replaced correctly. Verified mask assembled stack in bag: Down filtering-absorbing box on top - a helmet-mask, which is not folded, only a few turn up the head and the side part so as to protect the glasses assembly.